paramedic one Posted April 20, 2007 at 04:49 AM Share Posted April 20, 2007 at 04:49 AM Hallo, ich fange gerade erst mit IPSC an und möchte meine liebgewonne Glock 19 in der Production class weiternutzen. Darf ich Magazine der Glock 17 (2 Schuß serienmäßig mehr) für die Glock 19 nutzen (optionales Zubehör vom OFM für die Glock 19) ? Darf ich ein Metrolight Visier (Tritiumvisierung zum Schießen bei Dunkelheit) an der Waffe montiert lassen? Fremdvisiere sind ja erlaubt, wenn sie nach Art und Typ dem Original entsprechen. Über eine Antwort eines Range Officer oder Master würde ich mich freuen. Danke Ingo :? Link to comment Share on other sites More sharing options...
.45ACP Posted April 20, 2007 at 12:35 PM Share Posted April 20, 2007 at 12:35 PM Bin zwar weder RO noch RM, da ich ja auch erst rund ein halbes Jahr IPSC schiesse. Aber ich weiss dass man in der Division Production keine +2 Böden benutzen darf. Auch keine Gewichte damit sie schneller rausfallen! (Ich mache daher öfter einen Magi Wechsel wenn noch genug im Tank ist. Mun ist ja ein erlaubtes Gewicht :mrgreen: ) Zur Visierung gibts nur eine Regel: Draufmachen kannst Du alles was auf die Originalmontage passt. (schwalbenschwanz darf nicht verändert werden) Hier der Link zu den Handgunrules: Solltest Du Dir mal zu Gemüte führen! http://www.ipsc.org/pdf/RulesHandgun.pdf Auf Seite 56 findest Du die Antwort auf Deine Magazinfrage! Viel Spass und gut Schuss!! Link to comment Share on other sites More sharing options...
paramedic one Posted April 21, 2007 at 06:39 AM Author Share Posted April 21, 2007 at 06:39 AM Hallo .45acp die Mags für die Glock 17 haben keinen +2 Boden, sie sind lediglich ein bischen länger als die für die Glock 19. Aber immer noch kürzer als 17 cm und optionales Zubehör für die Glock 19. Die regeln habe ich schon 2x komplett gelesen aber es steht nirgendwo, dass nur standardmags erlaubt sind. Daher meine Frage an einen Officer oder Master wie das auf Turnieren gehandhabt wird. Gruß Ingo Link to comment Share on other sites More sharing options...
.45ACP Posted April 21, 2007 at 11:05 PM Share Posted April 21, 2007 at 11:05 PM Hi Ingo Na dann is ja alles Klar. Glock 19 = Originalmagazin! Man muss kein Rangemaster sein, um zu wissen dass man sofort in Standard gewertet würde, wenn man ein 17er Magi in einer 19er führen will! Gruss Dani Link to comment Share on other sites More sharing options...
paramedic one Posted April 22, 2007 at 04:21 AM Author Share Posted April 22, 2007 at 04:21 AM Hallo Dani, in welchem Regelwerk steht denn, dass nur "Orginalmags" benutzt werden dürfen ? Gruß Ingo Link to comment Share on other sites More sharing options...
rugerclub Posted April 22, 2007 at 08:23 AM Share Posted April 22, 2007 at 08:23 AM kine Veräderungen an der Waffe: Production Division 1 Minimum power factor for Major Not applicable 2 Minimum power factor for Minor 125 3 Minimum bullet weight No 4 Minimum bullet caliber / cartridge case length 9mm (0.354�) / 19mm (0.748") 5 Minimum bullet caliber for Major Not applicable 6 Minimum trigger pull (see Appendix F2) 2.27 kg (5lbs) for first shot 7 Maximum handgun size Maximum barrel length 127mm (5�) 8 Maximum magazine length Yes, see below. 9 Maximum ammunition capacity No 10 Max. distance of handgun and mags/speed loaders from torso 50mm 11 Rule 5.2.3.1 applies Yes 12 Restriction on position of holster and other equipment Yes, see below. 13 Optical/electronic sights permitted No 14 Compensators permitted No 15 Ports permitted No 16. Only handguns approved and listed on the IPSC website may be used in Production Division. 17. Single-action-only handguns are prohibited. Handguns with external hammers must be fully decocked. First shot attempted must be double action. Competitors in this Division who, after the issuance of the start signal and prior to attempting the first shot, cock the hammer on a handgun which has a loaded chamber, will incur one procedural penalty per occurrence. Note that a procedural penalty will not be assessed in respect of courses of fire where the ready condition requires the competitor to prepare the handgun with an empty chamber. In these cases, the competitor may fire the first shot single action. 18. Neither the handgun, nor any of its attachments, nor any allied equipment (e.g. magazines or other loading devices), can extend forward of the line illustrated in Appendix F3. Any such items a Range Officer deems not to be in compliance must be safely and promptly adjusted, failing which Rule 6.2.5.1 will apply. 19. Original parts and components offered by the OFM as standard equipment, or as an option, for a specific model handgun on the IPSC approved handgun list are permitted, subject to the following: 1. Modifications to them, other than minor detailing, are prohibited. Prohibited modifications include changing the original color and/or finish of a handgun, and/or adding stripes or other embellishments. 2. Base plates and/or any other devices which provide additional ammunition capacity (e.g. "+2" magazine extensions), are prohibited. 3. Sights may be trimmed, adjusted and/or have sight black applied. 20. Aftermarket parts, components and accessories are prohibited, except as follows: 1. Aftermarket magazines which match the external dimensions of standard magazines offered by the OFM for the approved handgun are permitted. 2. Aftermarket sights of the same type and kind offered by the OFM for the approved handgun are permitted, provided their installation and/or adjustment requires no alteration to the handgun. 3. Aftermarket grips which match the profile of the OFM standard for the approved handgun and/or the application of tape on grips is permitted, however, rubber sleeves are prohibited. 21. A competitor who fails to comply with any of the requirements above will be subject to Rule 6.2.5.1 Link to comment Share on other sites More sharing options...
.45ACP Posted April 22, 2007 at 08:56 AM Share Posted April 22, 2007 at 08:56 AM Danke Ruger! Link to comment Share on other sites More sharing options...
paramedic one Posted April 22, 2007 at 09:26 AM Author Share Posted April 22, 2007 at 09:26 AM Hallo ihr beiden, das Regelwerk habe ich schon gelesen aber an welcher Stelle steht, dass ich nur das Standardmag nutzen darf ? Gruß Ingo Link to comment Share on other sites More sharing options...
rugerclub Posted April 22, 2007 at 09:36 AM Share Posted April 22, 2007 at 09:36 AM 1. Aftermarket magazines which match the external dimensions of standard magazines offered by the OFM for the approved handgun are permitted. also magazine aus dem zubehör erlaubt, sofern sie keine veränderungen darstellen (abmessung, kapazität) Link to comment Share on other sites More sharing options...
paramedic one Posted April 22, 2007 at 08:18 PM Author Share Posted April 22, 2007 at 08:18 PM Das 17 Schuß Magazin für die Glock 17 ist ein optionales Zubehör für die Glock 19 und ist vom Originalhersteller (Glock) für die Glock 19 erhältlich. Es ist kürzer als 17 cm und hat keinen +2 Magboden. Link to comment Share on other sites More sharing options...
rugerclub Posted April 22, 2007 at 08:24 PM Share Posted April 22, 2007 at 08:24 PM aber es ist länger als das originale!! nimm doch direkt dieses hier 8) Link to comment Share on other sites More sharing options...
paramedic one Posted April 22, 2007 at 08:49 PM Author Share Posted April 22, 2007 at 08:49 PM In der deutschen Übersetzung der Regeln heißt es auf seite 84, Punkt 19 "Originalteile und Komponenten , die vom OFM für ein spezifisches auf der IPSC seite gelistetes Kurzwaffenmodel als Standart oder ALS OPTION angeboten werden, sind unter folgenden Voraussetzungen erlaubt : ... Magböden und /oder andere Vorrichtungen die eine erhöhte Munitionskapazität bewirken z.B. +2 Böden sind verboten. Ein 17 Schuß Mag von Glock ist eine Originalkomponente als Option für die Glock 19, hat keinen +2 Boden und enthält keine andere Vorrichtung , Oder ??? :? Link to comment Share on other sites More sharing options...
second6 Posted April 22, 2007 at 10:33 PM Share Posted April 22, 2007 at 10:33 PM zwar kannst du auch das g17 mag in die g19 stecken aber das magazin selber ist lt. regelwerk in dem falle die "vorrichtung, die eine erhöhte munitionskapazität bewirkt" und somit nicht erlaubt. dass die magazine kompatibel sind, liegt einfach am aufbau und ideologie der waffe (alles kann mit allem gekreuzt werden) aber das verbot steht über dem. wohl kaum, dass glock irgendwo explizit schreibt, dass sie die g17 magazine auch für die g19 als zubehör produzieren, vielmehr steht wohl, dass diese teile kompatibel sind aber daraus ergibt sich keine erlaubnis für ipsc. sonst würde doch jeder g17-schütze mit einem 31er mag rumrennen, das passt auch. aber primär ist das magazin für die g18 produziert und lediglich in der g17 passend aber nicht explizit als zubehör für die g17 gedacht. eine ny trigger ist zubehör, +-steuerfeder ist zubehör und ist regelkonform (sofern in dem falle das abzuggewicht den regeln entspricht). diese teile passen auch in verschiedene von glock angebotene waffen dh. teil x passt für g17 und g19, das darf man bei beiden verwenden. kurz: nicht erlaubt, weil primär nicht für die g19 vorgesehen (das "passen" alleine reicht nicht aus) dh. die prodzieren nicht für die g19 extra magazine in überlänge, sondern nehmen einfach das magazin von einem anderen model, weils auch passt. und das erfüllt die anforderung als "option" nicht. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now